WI 715-265-3237 | MN 507-262-1027 WI 715-265-3237 | MN 507-262-1027 Get a Quote

Snow Services Clear the Way

Snow Plowing and Snow Removal in New Richmond, WI

Snow can cover a driveway, parking area, walkway, or entrance within a few hours. Fitzgerald Lawn Care provides snow plowing and snow removal in New Richmond, WI, when accumulation reaches two inches or more.

We review the property before winter, confirm the surfaces included in the service plan, and choose where cleared snow will be placed. Snow blowing, shoveling, salting, sanding, and de-icing can also be included where needed.

715-265-3237 Get a Quote

Plan Before Snow Builds Up

Clear Priority Areas Before Snow Piles Up

New Richmond snowfall, drifting, freezing rain, and refreezing can quickly affect driveways, parking areas, entrances, shared walkways, and other frequently used surfaces. Fitzgerald Lawn Care identifies the areas that need attention and lists them in the service plan before winter weather arrives.

The equipment depends on the surface and available space. A plow can move snow from open driveways, private drives, and parking areas. A blower or shovel may be needed for steps, narrow walks, and areas close to a building. Salting, sanding, and de-icing are listed separately when included.

Snow also needs somewhere to go. Poorly placed piles can narrow a driveway, take away parking, hide a sign, block a drain, or melt across a walkway. We select suitable storage areas while curbs, pavement edges, drains, and landscape features are still visible.

Your estimate will show the two-inch snowfall trigger, covered areas, requested services, snow-storage locations, and pricing. This gives the crew a clear plan before the first storm reaches New Richmond.

Your Six-Step Winter Plan

How Our Snow Plowing and Removal Service Works

Review the Property

Show us the driveways, parking areas, private drives, walkways, steps, entrances, and other surfaces that need clearing. We check slopes, gravel, tight turns, shaded areas, drainage routes, and places where snow tends to drift.

Tell us which areas need attention first and whether gates, access codes, parked equipment, or limited working hours affect the route.

Confirm the Covered Areas

Every included surface is listed in the estimate. Plowing a driveway or parking area does not automatically include nearby steps, walks, or entrances.

Snow blowing, shoveling, salting, sanding, and de-icing are also written into the plan when requested. This prevents confusion once snow is already on the ground.

Mark Hidden Features

Curbs, parking stops, landscape borders, drains, utility covers, culverts, hydrants, retaining walls, and other low features can disappear under a few inches of snow. Visible markers help the operator identify those boundaries.

Move bins, trailers, portable signs, hoops, hoses, cords, and loose equipment away from the work area before winter service begins.

Choose Snow-Storage Areas

We identify locations that can hold cleared snow without blocking visibility, drainage, parking, entrances, or room for later storms. The first snowfall may leave a small pile, but repeated service can use that space quickly.

Let us know if construction, equipment, or another property change makes an agreed storage area unavailable.

Begin at Two Inches

Fitzgerald begins snow removal when accumulation reaches two inches or more. Arrival time depends on the snowfall rate, storm length, wind, drifting, road conditions, and the scheduled route.

Snow may continue falling after a visit during a long storm. Your service plan will explain how continuing accumulation is handled.

Complete the Listed Work

Our crew plows, blows, or shovels snow from the surfaces named in the estimate. Salting, sanding, or de-icing is applied only where it is included in the plan.

Conditions can change after service. Wind may return snow to an open area, and water from melting piles or roof runoff may freeze again when temperatures fall.

Prepare for Every Visit

What to Do Before and After Snow Service

Move vehicles, trailers, garbage bins, decorations, and other loose items before the crew arrives. A plow cannot clear snow beneath a parked vehicle. Even a small item can become difficult to see once snow begins drifting.

Install markers before the ground freezes. Use them around curbs, drains, landscape edges, culverts, utility equipment, retaining walls, and other features that may become hidden. Keep gates open and make sure access instructions are current.

While equipment is operating, keep people and pets away from the work area. Plows and blowers may stop, reverse, turn, or make another pass. Exterior lighting can help the crew see entrances and property edges after dark.

Check the cleared surfaces afterward. Packed snow may remain slick, and daytime melting can send water across pavement before it freezes at night. Municipal plows may also leave a dense ridge at the end of a driveway after private service is complete.

The National Weather Service winter safety guidance explains that black ice can be difficult to see when temperatures are near freezing. Continue checking shaded pavement, slopes, steps, and drainage areas as conditions change.

Choose the Right Snow Help

Plowing, Blowing, Shoveling, and Ice Treatment

Professional snow removal integrates equipment, surfaces, and weather into a clear winter plan.

  • Snow plowing and removal: Plowing works best on suitable driveways, parking areas, private drives, and other open surfaces. The operator needs enough room to turn, work around obstacles, and push snow toward the agreed storage area.
  • Snow blowing and shoveling: Snow blowers and shovels can handle listed walkways, steps, entrances, paths, and narrow spaces that a plow cannot reach. These areas must appear in the estimate rather than being assumed as part of plowing.
  • Salting and de-icing: Salt and other de-icing materials can help loosen or melt ice when surface temperature and weather conditions allow. They cannot prevent new ice from forming if more moisture reaches the surface or the temperature continues to fall.
  • Sanding: Sand adds traction to a slippery surface but does not melt ice. It may be used when traction is the main concern or when cold conditions limit how well a melting material performs.

One property may need more than one service. The estimate will show which method applies to each listed surface.

New Richmond Winter Weather

Why Winter Conditions Change the Work

New Richmond winters can bring dry powder, wet snow, blowing snow, sleet, freezing rain, and quick temperature changes. Each condition affects how snow moves, how much storage space it needs, and what may be required after plowing.

Dry snow is lighter but can drift back over driveways, walkways, and parking edges. Wet snow is heavier, takes longer to move, and builds larger piles. Freezing rain may leave a slick layer that a plow blade cannot remove.

Temperature changes can create problems after a storm. Snowbanks and roof edges may melt during the day. Water can then move across a driveway, parking lane, entrance, or walkway and freeze after dark.

Areas that often need another look include:

A service visit clears the areas listed in the plan, but it cannot keep every surface free of snow or ice throughout a changing storm. Wind, new precipitation, municipal plows, melting, and refreezing can alter the property afterward.

Make Room for the Next Storm

Plan Where the Cleared Snow Will Go

Snow-storage planning matters throughout the season, not only during the first snowfall. Piles grow after repeated visits and may spread as they settle, melt, and freeze again.

Protect Entrances and Travel Lanes

Snow piles should not narrow a driveway, cover a walkway, block a garage, or interfere with the main route through the property.

Preserve Visibility

Intersections, driveway exits, signs, and parking turns need clear sightlines as piles grow.

Keep Drainage Paths Open

Meltwater needs room to move toward suitable drainage areas instead of flowing across pavement and refreezing.

If an agreed storage location becomes blocked, contact Fitzgerald before the next storm so the crew can update the plan.

Leave space for later snowfall

Using every available storage area during the first storm can make later plowing more difficult.

Account for changing conditions

Construction, parked equipment, temporary signs, and damaged markers may affect where snow can be placed.

If an agreed storage location becomes blocked, contact Fitzgerald before the next storm so the crew can update the plan.

Know When to Set It Up

When to Arrange Snow Plowing and Removal

Set up snow service before a major storm enters the forecast. This gives Fitzgerald time to review the property, mark obstacles, identify storage areas, confirm the covered surfaces, and determine route availability.

  • A driveway, parking area, or private drive needs regular clearing
  • Walkways, steps, or entrances require separate attention
  • Snow piles repeatedly reduce parking or visibility
  • Slopes and shaded areas develop recurring ice
  • The property has gravel, tight turns, or limited snow storage
  • Wind commonly returns snow to the same surface
  • Salting, sanding, or de-icing may be needed
  • The property layout has changed since the previous winter

Winter routes have limited capacity. Waiting until the property is already covered may leave fewer scheduling options.

More Help for Your Property

Related Fitzgerald Services in New Richmond

Fitzgerald provides snow, lawn, landscape, and outdoor pest services for properties across the New Richmond area.

Related services are estimated separately so the snow-removal scope remains clear.

Local Experience Since 1998

Why Choose Fitzgerald Lawn Care?

Fitzgerald Lawn Care has served New Richmond and nearby communities across Western Wisconsin and Eastern Minnesota since 1998. We prepare the snow-removal plan around the property’s surfaces, layout, obstacles, and available storage space.

The property is reviewed first

We look at the surfaces, slopes, turns, obstacles, drainage, and areas where snow tends to collect.

The covered work is written down

The estimate identifies every driveway, parking area, walkway, step, entrance, or other surface included.

The snowfall trigger is clear

Fitzgerald begins snow removal when accumulation reaches two inches or more.

The equipment matches the area

Plows handle suitable open surfaces, while blowers and shovels cover listed smaller spaces.

Ice work remains separate

Salting, sanding, and de-icing are included only when they appear in the service plan.

Snow placement is planned

Agreed storage areas protect visibility, drainage, regular property use, and room for later storms.

Your estimate will explain the covered surfaces, snowfall trigger, preparation, storage locations, requested services, and pricing.

Local Snow Questions

Frequently Asked Questions

Keep Your New Richmond Property Ready for Winter

Arrange service before snow covers the driveway, parking area, walkway, or entrance. Fitzgerald Lawn Care will review the property, confirm the surfaces to be cleared, identify snow-storage locations, and explain which supporting services fit each area.

Your estimate will cover the two-inch snowfall trigger, preparation, plowing areas, walkway work, ice treatment options, and pricing. Tell us about slopes, gravel, drifting, parked equipment, access instructions, and any surface that needs special attention.

715-265-3237 Get a Quote